These days, the Chinese people were excited by one good news after another.
At the end of April, China’s first national aircraft carrier was launched!
At the beginning of May, China’s domestic large aircraft took off!
China has thousands of miles of seas and seas. For thousands of years, it is finally necessary to swim the Chinese own aircraft carrier!
Thousands of miles of blue sky in China, for thousands of years, finally left the shadow of China's own big plane!
gratifying!
Congratulations!
However, in this thick festive atmosphere, there was a harsh gunshot!
Gunshots, from the Taiwan Strait.
Taiwanese officials actually shot and fired on Chinese mainland fishing boats!
On May 6, Taiwan’s “sea patrol team†seized the fishing vessel Nanao No. 31049 from Guangdong Province on the grounds of “cross-border fishingâ€. Fired rubber bullets, causing two mainland fishermen to be injured!
Two Chinese were physically injured.
More than 1.3 billion Chinese people are hurt!
How can China take off again? The Taiwan issue is not resolved. After all, it is a heart disease.
If even the Taiwan issue can't be solved, what is the significance of building a bigger, more advanced and more advanced aircraft carrier?
One China has long been a consensus in the world.
Even Trump, who has come up with a slap in the face and who does not recognize the one-China principle, has changed his mouth.
Just on stage, Trump screamed at Tsai Ing-wen. Taiwan declared a major diplomatic breakthrough.
What now? Trump refused to accept Tsai in English!
Why?
After a year, Trump understood that China could not provoke.
The one-China principle is China's core interest and cannot be touched.
Tsai Ing-wen is just a chess piece in the United States.
More ironically, Tsai Ing-wen's ruling partner, "Vice President" Chen Jianren, after being elected as a foreign academician of the US Academy of Sciences, marked the nationality: "Taiwan, China"!
The United States is Taiwan’s daring to rely on.
Some people even bluntly said that the United States is the "dry" of Tsai Ing-wen.
"Cognac" recognizes that Taiwan is part of China; even Taiwan's "vice president", the United States agrees to be Chinese!
Tsai Ing-wen, you still have a wishful thinking that you will not recognize the "1992 Consensus" and do not recognize the "one-China principle". What is the point?
Tsai Ing-wen does not want to share the pride and honor of the Chinese with the Chinese mainland, but choose to be the grandson of the United States! Behind the US government, wow!
Make people feel, really!
Countries all over the world are close to China.
President Xi Jinping proposed "One Belt, One Road". This month's summit will be held soon. 28 heads of state and government have confirmed attending the forum. People from all walks of life in 110 countries participated.
Even Japan, which was strongly opposed at the beginning, repented and came to "cut the queue" and strongly urged to participate!
why?
China has already expressed its position and welcomes people from all countries to take the express train developed by China.
Countries around the world seem to be happy to catch up with China's express trains.
Taiwan, which was originally part of China, is holding on to death. It is trying to stop the Chinese wheels from rolling forward. What are the consequences? !
This choice of Tsai Ing-wen authorities, we can only say, stupid!
The Chinese government has given great patience to the embarrassing and stupid Tsai English administration.
The incident of shooting fishermen from mainland China still stays at the level of the Taiwan Affairs Office.
A spokesperson for the Taiwan Affairs Office of the State Council said that the incident was indignant and demanded that the Taiwan side immediately investigate the incident seriously and release the ship as soon as possible to prevent such incidents from happening again.
This kind of reminder is very kind.
This is telling Taiwan that we should not do too much in everything.
We must know that China today is no longer China in the 1950s and 1960s!
The small Taiwan Strait cannot stop the pace of the Chinese People's Liberation Army.
At the beginning of 2017, China’s first aircraft carrier, the Liaoning Province’s “ring navigationâ€, was a small warning.
When the motherland of China was really shot, when the son of Taiwan came home, Tsai Ing-wen cried nowhere!
China’s second aircraft carrier, the national aircraft carrier that just launched, has not yet been named. The "Taiwan" has a very high voice on the Internet.
There are three reasons. Every article is closely related to Taiwan!
First of all, this is the pride and pride of letting the people of Taiwan and the people of the mainland share the progress of the motherland.
Imagine if the aircraft carrier was named "Shandong", it would make the Shandong people extremely proud.
If you name "Taiwan", it is also to make the patriotic Taiwanese people proud together!
More importantly, this is a solemn warning to the dead Taiwanese elements!
The reason why Taiwan left the country for many years is precisely because our navy was not strong enough. Today's "Taiwan" has become a powerful symbol of the Chinese navy, and it is necessary to solve the "Taiwan issue"!
Look a little further. After Taiwan’s return to the motherland, Taiwan will become the frontier of the Chinese navy and become the mother port of the Chinese aircraft carrier.
This has already broken through the first island chain in the United States. Taking Taiwan as the base, breaking through the second island chain, going to the deep blue, going to the world, naturally nothing to say!
A Small Computer System Interface (SCSI) connector, also pounced as [scuzzy" connector, is used for physically connecting and transferring data between computers and peripheral devices.
SCSI is the small computer system interface, which is an independent processor standard used for the system level interface between computer and intelligent devices (hard disk, floppy, optical drive, printer, scanner, etc.). It is an intelligent universal interface standard, which has the function of communicating with various types of peripherals. SCSI uses the standard software interface of ASPI (SCSI programming interface) to make the driver communicate with the SCSI adapter installed inside the computer. SCSI interface is widely used in high-speed data transmission technology on minicomputers. SCSI interface has many advantages, such as wide application range, multitask, wide bandwidth, low CPU utilization, and hot plug.
SCSI connectors type and interfaces
Centronics 50-pin connector: The Centronics 50-pin connector was once the most widely used SCSI connector. An external connector only, the Centronics is a SCSI-1 connector that looks the same as the Centronics cable that attaches to a parallel port printer. The Centronics 50-pin cable comes in male and female styles, and gender changers and cable converters are commonly available. Although used on older SCSI devices and external drive enclosures, this interface is no longer heavily used, due to its slow speed and short cable lengths.
High-density 50-pin connector: The high-density 50-pin connector is used on scanners and Jaz drives. It is one of the more common SCSI connectors and is usually used to connect SCSI-2 devices. Both ends of the cable are usually 50-pin male, while the sockets on the host adapter and external devices are 50-pin female.
DB 25-pin connector: The DB 25-pin or D Sub 25 is by far the most widely used connector. This connector is used for parallel and serial printers in addition to the many other devices available. Both ends of the cable are usually 25-pin male, while the sockets on the host adapter and external devices are 25-pin female. This cable is almost always an external connector.
Note: DB-25 SCSI CABLES are not compatible with and should not be used as serial or printer cables; serial cables and printer cables should not be used or attached to DB-25 SCSI adapters. You can short out the SCSI host adapter or the motherboard by using the wrong cable. Marking cables is the best way to avoid this.
IDC50 connector: The IDC50 is the most common internal SCSI connector. It is very similar to the standard IDE internal ribbon cable. The IDC50 SCSI cable is considerably wider then an IDE ribbon cable; in fact, it is usually the widest standard internal cable in use. This is a standard SCSI-2 10MBps internal SCSI cable. Many low-end cables have only two or three connectors, allowing for one or two devices to be attached to the cable. Seven-device cables are available, though they are often expensive and require a large case, as the cables may be four or five feet long.
High-density 68-pin connector: The high-density 68-pin connector is the SCSI connector of choice for SCSI-3 host adapters and peripherals. There is an internal ribbon cable version that looks very similar to the IDC50 connector. Many low-end cables have only two or three connectors, allowing for one or two devices to be attached to the cable. Seven-device cables are available, though they are often very expensive and require a large case, as the cables may be three or more feet long. Both ends of the external cable are usually 68-pin male, while the sockets on the host adapter and external devices are 68-pin female.
SCA 80-pin Micro-Centronics connector: SCA stands for Single Connector Attachment, a type of disk drive connector that includes connection pins for the power cables as well as the data wires. A SCA connector uses an 80-pin plug and socket to connect peripherals. This connector combines power, data channel, and ID configuration for fast installation and removal. SCA connectors are typically found only on high-end SCSI hard disks. The SCA interface was designed to provide a standard connection for systems using drives that can be hot-swapped. SCA makes swapping SCSI hard drives much easier than with traditional SCSI cables, plugs, and sockets. An adapter enables SCA drives to fit into standard SCSI enclosures.
SCSI SFF 8482: Also called "4x internal" by some vendors. This is a connector with the same form factor as SATA with the addition of a "bump" to key it specifically for SAS. (SATA drives can be plugged into SAS controllers, but SAS drives will not function with a SATA controller; hence, the necessity for the key bump on the connector.) As the name says, it's meant to be used internally, i.e., inside the computer case.
SCSI SFF 8484: Also called "32-pin" or "MultiLane". This is a high density connector usually intended to plug into the motherboard, controller, or backplane itself. Cables with this connector on one end usually have four individual SFF 8482 connectors on the other.
Serial Attached SCSI SFF 8470: Also called "4x external" by some vendors. This is simply a version of the SFF 8484 that's meant to be used with external (i.e., not located within the case) drives.
Scsi Connector,Half Pitch Scsi Connectors,Scsi Lead Half Pitch Male,SCSI (SAS) Connectors,Female Scsi Connector,SCSI Connectors I/O Connectors,Manufacturers and Suppliers in China
ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com