Changzhou Xinbei District Construction Project
Tender Notice (Post-qualification)
No.-BI-001
I. Project Name: “Two Museums and Two Centers†Project in Changzhou Hi-tech Zone (New North District)
Second, project overview:
1. Total investment: 69.413 million yuan
2. Location: South of Yunhe Road, Xinbei District, Changzhou, north of Chongren Street, east of Chongyi Road, west of Changjiang North Road
3. Construction Scale: The building has a total area of ​​107,375 square meters, including 6612 square meters of floor-to-ceiling building area, including 38,341 square meters of archives, 5,753 square meters of planned building area, 1,792 square meters of data center building area, and administrative service center construction. It has an area of ​​16,202 square meters, a social management service center construction area of ​​4,036 square meters, an auxiliary building construction area of ​​28 square meters, and an unacceptable construction area of ​​395 square meters on the ground, including an insulation floor construction area of ​​182 square meters and an overhead floor construction area of ​​213 square meters; The underground building area is 40,818 square meters. (According to the plan drawing area of ​​the final plan).
4. Bidding content: See tender documents for details
5. Plan opening and completion time: January 2018 to June 2018 (designed in January 2018 for the end of the test of the test pile; the end of the support pile in April 2018; the test of the pile in the end of June 2018; Provide a periodic report within 1 month)
Third, the bid segment division:
Bid section
No. Name of the building Construction area
(m2) Estimated price
(RMB 10,000) Bidder Qualification
Category, level Project leader
Professional, grade
1 Changzhou High-tech Zone (Xinbei District) “Two Halls and Two Centers†Project Pile Foundation Inspection 107375 68.53 Construction Engineering Quality Inspection Organization Qualification Certificate issued by the construction administrative department Project leader is issued by the provincial or above construction administrative department Test and inspection engineer's induction certificate, senior engineer title
Fourth, other registration conditions:
1. The Commonwealth does not accept bids in this tender and only accept online registration.
2. The bidder shall meet the following requirements:
(1) A qualification certificate for a construction project quality inspection agency issued by the construction administrative department must be included in the qualification certificate. The project must include a special inspection of the foundation foundation project (the project must include static load detection and low-strain testing of the bearing capacity of a single pile);
(2) The bidder shall have a CMA certificate of measurement certification issued by the provincial and above technical supervision department, and the content shall include: foundation piles;
(3) The person in charge of the project shall have the post qualification certificate of the construction quality inspection personnel issued by the construction administrative department at or above the provincial level and advanced engineering.
According to the title of the teacher, the person in charge of the project must enter the 5.0 database of the bid office (input URL: http://).
(4) Foreign inspection organizations must go through the formalities of registration and registration of credits at the Municipal Construction Management Center. The scope of record includes: static load testing for single pile bearing capacity and low-strain testing.
3. The bidding deposit of RMB 13,000 yuan/unit must be transferred from the basic account of the bidding unit to the special account for bidding security of the Construction Management Center of the Changzhou New District by transfer method before the deadline for submission of bids. Account name: Construction Management Center of New North District, Changzhou City Open bank: Agricultural Bank of China Xinbei Sub-branch Business Department; account number; the first time to pay the bid bond unit must bring the original account opening permit copy of the original and a copy (with official seal) to the Changzhou Xinbei District People's Defence Building 108 for the record . The bidder should fully consider the transit time and ensure that the bid security reaches the bid security special account and issue a receipt before the deadline for bid submission. Annual margin users are required to comply with the Changzhou Urban and Rural Construction Bureau Chang Jian [2012] No. 211 notification requirements.
V. Qualification review related information.
5.1 Original Information Required for Qualification Examination:
(1) Changzhou Construction Project bid application (see Attachment 1);
(2) Bid security receipt;
(3) The identity certificate of the legal representative of the enterprise, the power of attorney of the legal representative of the enterprise, the identity card of the second-generation resident of the trustee, and the second-generation resident identity card of the person in charge of the bidding project;
(4) The trustee and the person in charge of the bidding project must provide the original payment certificate for the payment of the social basic pension insurance by the bidding unit issued by the social security institution (with the social security center chapter or the social security center in charge of payment proof electronic special seal, non-social security manual ), the payment period is from September 2017 to November 2017 for three consecutive months;
(5) Foreign testing organizations must provide Changzhou's "Regional Inspection Unit Credit Management Registration Form".
5.2 Information required for online review of qualifications:
(1) Business license (copy);
(2) Qualification certificate (copy) of construction project quality inspection organization;
(3) "Measurement Certification Certificate" (CMA, copy) issued by the Provincial and above Quality and Technical Supervision Bureau;
(4) The person in charge of the project tests the inspection engineer's job certificate and title certificate.
special reminder:
1 The information required by paragraph 5.1 above must provide the original;
2 The information required by paragraphs 5.1 and 5.2 above must be provided with two additional copies. The copies must be bound in the above order and stamped with official seals per page;
3 Except the original ID card, the original identity of the legal representative of the enterprise, the original authorized representative of the company's legal representative, the original of the bid bond receipt, no bagging and sealing, and other qualifications must be bagged and sealed together (Note: sealed bag) The seam must be stamped with the official seal of the company, and the mark (Note: the name of the project on the sealed bag, the full name of the company, and the seal of the registered company and the seal of the legal representative must be stamped).
One-time submission before the time, and no longer accept supplementary information after the deadline for bid submission;
4 The legal representative of the company may not provide a power of attorney to handle bidding matters;
5 If all the necessary information for the post-qualification examination within the specified time is not provided or incomplete, the qualifications shall be examined after being qualified for failure. The originals must be able to fully prove the requirements of the announcement;
6 The data of qualification examination 5.2 shall be based on the information that has been entered into the “Electronic Tendering System of Changzhou Construction Project†and the “Enterprise Integrity Databaseâ€, and shall be executed in accordance with Article 2(3) of Su Jianzhao [2015] No. 29 document. , The seal is complete, and within the validity period, the qualification examination that has not been entered as required is not qualified.
6. The legal representative of the bidding unit (or its authorized agent) and the person in charge of the bidding project must bring my second-generation ID card and corporate encryption key to the bid opening site and sign it before the deadline for submission of bids, and proceed with the tender opening procedure. When making a name, submit the identity certificate of the legal representative of the company, the power of attorney of the legal representative, and the original of the second-generation ID card to the tenderer to prove his presence. If remote decryption is required, a written application must be submitted before the deadline for submission of bids. Failure to comply with the above requirements will result in invalid bids for the bid documents.
7. Announcement time:
This announcement is issued from December 13, 2017 to December 18, 2017
"Non-burning, nicotine for users, low tar content. As the heating temperature (below 500℃) is lower than the combustion temperature of traditional cigarettes (600-900℃), the harmful components produced by tobacco high-temperature combustion pyrolysis and thermal synthesis are reduced, and the release amount of side-flow smoke and environmental smoke (second-hand smoke) is also greatly reduced."
Heating non - combustion products are electronic devices containing tobacco. When you heat them, they produce a nicotine-containing vapor that you can inhale.
They are different from traditional cigarettes and work by heating tobacco to a very low temperature. Tobacco is heated to 350 ° C in a heat-incombustible device, while traditional cigarettes burn at up to 900 ° C.
Still, the temperature at which non-combustion products are heated is high enough to vaporize and inhale harmful chemicals.
Although both are electronic devices, heated non-combustible products are also different from e-cigarettes or steam devices. These usually use chemical liquids and do not necessarily contain nicotine. E-cigarettes tend to heat liquids to around 250 degrees Celsius to produce vapor.
Hnb Device Oem,Hnb Device Patent,Hnb Device,Hnb Device For Sale
Shenzhen MASON VAP Technology Co., Ltd. , https://www.disposablevapepenfactory.com