The central feeding system is commonly called “centralized feeding system, automatic feeding systemâ€; today, some customers have asked me why the central feeding system can be used in the plastics industry; this question has caused me to ask questions, and then I find our company. Engineers who have worked for many years as central supply systems helped me solve this problem.
For example, it is clearer that if my company has 20 injection molding machines and produces the same product, now I will use 20 high-power suction feeders to feed the 20 injection molding machines, and each injection molding machine Next to the large pile of raw materials, if these things are in the workshop will take up a lot of space, but also easy to cause some of the source material pollution and waste. Here I can suggest that you can make a central feeding system and concentrate all the materials into one feeding room. A material feeding system is placed in the material room and connected to each injection molding machine by pipeline. As long as people stand at the front of the feeding system, they can easily supply 20 injection molding machines; this explanation should all be understood!
The central feeding system is designed for the production of plastic products in injection molding workshops. The main methods are: raw materials → storage → metering → drying → transportation → use;
The characteristics of centralized feeding are;
1. Efficient: 24-hour non-stop production,
2. Energy saving: It saves manpower waste, waste of source material pollution and also saves power and maintenance waste;
3. Personalization: You can design according to your workshop;
4. Modern factory image: Keep a clean production workshop and an unattended automated production workshop to establish a modern factory management image for your company.
This is why the central feeding system can be applied to the plastic industry!
![]()
- The Description of wifi Antenna
-
When selecting the antenna, it is necessary to pay attention to whether the connector of the antenna matches the connector of the connected device. Generally, SMA and TNC are used for WIFI
To use on the router, but on the 2.4 G wireless monitoring equipment fittings, if match, also can achieve the enhancement effect of the wireless signal transmission Magnetic antenna base, can suck on metal surfaces, makes the antenna signal is stronger Plug and play, without any additional conditions, but the antenna gain and directional property management are key points to consider. - The first standard WIFI antenna products were made by LTCC process, because of its width and general performance. Abroad, Airgain has launched a standard antenna with high temperature resistance and plastic seal, which is used in laptop computers, and a series of WiFi antennas with magnetic dielectric in mobile phones have been launched in China.
- The Picture of wifi Antenna
-
Wifi Internal Antenna,Wifi Antenna for PC,Wifi Antenna for Router,Wfi Antenna outdoor,Wifi Antenna Indoor
Yetnorson Antenna Co., Ltd. , https://www.yetnorson.com