The daily maintenance and maintenance of hydraulic presses is usually more than one point, because hydraulic presses do important daily maintenance work, so how to carry out effective maintenance is a problem that everyone is concerned about.
1. Check whether there is any looseness in the upper mold part and clean the attachment on the upper mold part
2. Clean the debris, sand, and dust on the hydraulic cylinder of the upper die hydraulic press. Check if the nut is loose and if the tubing connector is loose.
3. When the upper mold synchronous bearing cover and gear are loosened, it should be processed in time.
4. Is there any looseness in the upper vibration drive?
5. Check if there are any loose parts in the lower mold, clean the attachments on the parts of the lower mold, pay attention to the safety when cleaning, and put the block on the top and bottom molds.
6. If the lever nut of the lower mold hydraulic machine is loose, adjust the lock timely.
7. Whether the cylinder and cross-beam connector of the lower die press and fasteners and tubing connectors are loose.
8. Debris should be removed in the groove of the lower vibration plate.
9. Check if there is looseness of the lower vibration transmission parts and pipe joints.
10. Check if the vibration transmission parts and pipe joints are loose.
The above is more difficult to do. The key is to pay more attention to maintenance knowledge.
This article comes from /cn-news-id-37.html
consumer transformer,audio isolation transformer,power low frequency transformer,epoxy encapsulated transformer
IHUA INDUSTRIES CO.,LTD. , https://www.ihua-transformer.com