Certification:ETL CE ROHS listed,Utility-model patents
Â
Item NO. | YH-HRF305050120S- W |
Input Voltage | AC100-120V or 200-240V (50-60Hz) |
Power | 220V:10W/meter  110V:5W/meter |
Color | cool white,warm white,blue,green,red,RGB... |
Length | 50m/roll |
LED sources | SMD5050 |
LED Qty | 60pcs/meter |
IP grade | IP67 |
Cuttable unit | every 0.5 meter  ( RGB color : 1.0 meter / cut) |
Lifespan | 35,000 hours |
Warranty | 2 years |
Certifications | ETL,CE (EMC LVD) RoHSÂ |
Material | PVC cover,copper wire |
Working temperature | -20~70 |
Product Details:
for single color LED strip,we use "D"shape PVC cover,like magnifying glass,can
concentrate & magnify the lights,make the LED strip looks more bright!

For RGB color,our rgb controller can run 50m led strip,11 different lighting effect like below photo
Advantage about our products:
1.Chip
All the chips BET use good brand chip with 22-24LM/per(5050),3528 7-8 lm,5630 50-55lm per meter ,with uniform light and low light decay with high quality and long life span, Two years Guarantee,
2. PVC
BET Strips use high transparent plastic material, It can bear high temperature and with strong anti-ultraviolet, While most of the other normal strips only adopt muddy plastic material, this makes strips
not so bright and will be easily turn yellow after short time using.
3.Technology:
The LED and resistors BET mounted is with vertical mounted, while the others is with horizontal mounted.
This will be not so easy to fall off with the mounting when make installing.
4.Copper Wire:
BET Adopt pure cooper wire, With super conductivity, Higher brightness and more uniform light.
While the common one only use the iron wire with low material cost and poor conduction.
5.PCB
The PCB width we adopt is with 8MM,While others is only with 5MM,wider PCB is better for heatÂ
dissipation and protect the LEDS.
6.Craft
BET adopt advanced machine and technology for every process, you can see our BET's PCB insideÂ
is flat while other's is curly.
Â
Installation Diagram:
1.Install:Take out the package,make sure it comes with necessary accessories,which should include:
       fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto
       where you need,put the wire into sockets to light the strips.
2.Cut:Â Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end
      with end caps,seal with enough glue to make sure it is still waterproof.
3.Connect:Â Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of
          two separate strips to connect them into a long strip,after well connected,seal all the plugs
          with enough glue.
notice:RGB color need to connect a controller.Â
More of our products:
Application:
1) Architectural decorative lightingÂ
2) Archway, canopy and bridge edge lightingÂ
3) Amusement park, theater and aircraft cabin mood lightingÂ
4) Emergency hallway lightingÂ
5) Auditorium walkway lightingÂ
6) Stairway accent lightingÂ
7) Concealed lightingÂ
8) Backlighting for signage lettersÂ
9) Channel letter lightingÂ
10) Emergency exit path lightingÂ
11) Cove lighting
About our products :
Quality Control:Â
1.100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability ,Â
   and we  will also test its temperature after 24 hours' lighting.
2.Then after it is cool we again test 100% of the lamps to see if it still work well .Â
   Each lamp should passall these QC procedures before shipping to customer.
Â
Order infomation:
MOQ: Normally 200 meter
Trade term: EXW / FOB Shenzhen
Package :
1.for high voltage LED strip:50meter/ roll,two rolls in to a standard export carton;
2.for low voltage LED strip:5meter/roll ,40 rolls in to a carton;
3.we can custom the package as your requirement.
Warranty term :
2 years since the date of purchase
1. Under the terms of this warranty, if the product have a failure occurs under normal usageÂ
    within warranty period, we will provide free/rework new products
2. If Failure or damage due to incorrect operation, wire connection, or anything other do notÂ
   follow our  instuction, BET will provide paid maintance within warranty period.
Trade Terms:
1. Payment term: T/T 100% payment in advance, or for over 10,000USD, TT 30% deposit after order
   confirmed, the balance after goods ready before shipping .or Western Union, Paypal for small amount .Â
2. Lead time : normally in 7~15 working days after deposit receivedÂ
3. Sample policy : Samples are always availble for each model .Â
   Samples can be ready in 3~10days (base on the style) once payment received .Â
4. Shipping port: Shenzhen , ChinaÂ
5. Discounts : We offer discount for big quantity .
Please send me your inquiry with your specific needs,looking forward to your feedback !
Our Professional 60W solar panel manufacturer is located in China. including Solar Module. PV Solar Module, Silicon PV Solar Module, 60W solar panel for global market.
60W solar panel, Solar panel, PV solar panel, Silicon solar panel
Jiangxi Huayang New Energy Co.,Ltd , https://www.huayangenergy.com