Near the end of the year, this winter in the southern country is covering the earth with its majestic attitude. The sky is covered with cold rain, and the leaves on the trees on both sides of the street are beaten. The lighting designers in China's lighting industry, just like the green leaves in the southern winter, will be more green after the baptism of the wind and rain, and will rejuvenate in the spring of the future.
In Guangzhou, there is a person who specializes in lighting design. Mr. Zeng Guozhi, the chief designer of Guangying Lighting Design, has a lot of case works of hotel lighting in recent years, which is eye-catching. In particular, the central axis lighting design of Guangzhou Zhujiang New Town, which won the bid recently, is expected. Today, China Lighting Network reporter made a special trip to visit Zenggong. The design studio of Zenggong is a small building in the middle of the downtown. From the warm yellow light that the mahogany window reveals, it has already felt a strong artistic atmosphere. Throughout the ages, all those who have great wisdom are hidden in the city, and once worked in the points and lines of the drawings, use lighting to create an environment to create this prosperous world.
Lighting designer and pinch clay
China Lighting Network: How do you enter this line? What are the more satisfactory lighting design cases? What kind of career do you think lighting designers are?
Zeng Gong: After graduating from college, he entered the lighting industry. He has been in the past seven years. He has also been to Beijing, Shanghai and other places in the past years. He started to stage lighting and later focused on pure lighting design. I think the more satisfactory cases, such as Zhangjiajie Wulingyuan International Resort Hotel, Dongguan Liaobu Town Commercial Street, etc., are still good.
I think that the lighting designer's career is like a folk clay mixer. It is a craft, a craft. I draw this model and then they do it.
Lighting Designer Professional Qualification and Zhongzhao Award
China Lighting Network: At present, China Lighting Association has sponsored the “Lighting Designer†professional qualification certification, and the third Zhongzhao Award application work is also underway. Do you support these two tasks?
Zenggong: Because I am also a senior member of the China Lighting Society, the "Lighting Designer" professional qualification has long heard that the China Lighting Society is preparing for this matter. This is a good thing to promote the development of the industry and should be supported. At first, I thought that this would make the lighting designer's level uneven, but after reading the notice of the society, I feel that the requirements for this registration are still very formal and should not appear in the situation I am worried about. .
The third Zhongzhao Award is the only science and technology award in the Chinese lighting field officially approved by the National Science and Technology Awards Office. I heard that this year's major evaluation of lighting engineering design awards, lighting design engineering companies like us are still very interested in this award.
1 2 Next Page
Power Meter is a monitoring and testing instrument which determines the power consumption of a connected appliance and the cost of the electricity consumed.
Built-in 3.6V rechargeable Batteries ( . The purpose of the batteries is to store the total electricity and memory setting
Resetting
If an abnormal display appears or the buttons produce no response, the instrument must be reset. To do this,
press the RESET button.
Display Mode
Entire LCD can be displayed for about 1 minute and then it automatically gets into Model. To transfer from
one mode to the other, press the FUNCTION button.
Mode 1: Time/Watt/Cost Display Display duration(how long) this device connect to power source.LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which means after 24 hours, it will re-caculate. LCD on second line displays current power which ranges in 0.0W 〜 9999W. LCD on third line displays the current electricity costs which ranges in O.Ocost 〜 9999cost. It will keep on O.OOcost before setting rate without other figures.
Mode 2: Time/Cumulative electrical quantity Display Display duration(how long) this device connect to power source.
LCD on first line shows 0:00 with first two figures mean minutes(2 figures will occur while occur at 10 min) and the rest shows seconds. After 60mins, it displays 0:00 again with first two numbers meas hour(2 figures will occur at 10hours)and the rest shows minutes. The rest can be done in the same manner which
means after 24 hours, it will re-caculate. LCD on second line displays current cumulative electrical quantity which ranges in 0.000KWH 〜 9999KWH without other figures. LCD on third line displays"DAY"- "1 'Will be showed on numerical part(the other three figures will be showed at carry) which means it has cumulated electrical quantity for 24hours(one day). The rest can be done in the same manner untill the maximal cumulative time of 9999 days.
Mode 3: TimeA^bltage/Frequency Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays current voltage supply (v) which ranges in 0.0V 〜 9999V .LCD on third line displays current frequency (HZ) which ranges in 0.0HZ 〜 9999Hz without other figures.
Mode 4: Time/Current/Power Factor Display LCD on first line displays the same as Mode 1 dones.LCD on second line displays load current which ranges in 0.0000A 〜 9999A. LCD on third line displays current power factor which ranges in 0.00PF 〜 LOOPF without other figures.
Mode 5:Time/Minimum Power Display LCD on first line displays the same as Mode 1 dones. LCD on
second line displays the minimum power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Lo" without other figures.
Mode 6: Time/Maximal Power Display LCD on first line displays the same as Mode 1 dones. LCD on second line displays the maximal power which ranges in 0.0W 〜 9999W. LCD on third line displays character of "Hi" without other figures.
Mode 7: Time/Price Display LCD on first line displays the same as Mode 1 dones. LCD on third line displays the cost which ranges in O.OOCOST/KWH 〜 99.99COST/KWH without other figures.
Overload Display: When the power socket connects the load over 3680W, LCD on second line displays the''OVERLOAD[ with booming noise to warn the users, (selectable choice)
Supplemental informations:
1: Except [OVERLOAD[ interface, LCD on first line display time in repitition within 24hours.
2: LCD on first line, second line or third line described in this intruction take section according to two black lines on LCD screen. Here it added for clarified purpose.
3. Mode 7 will directly occur while press down button "cost".
4. [UP"&"Down" are in no function under un-setting mode.
Setting Mode
1. Electricity price setting
After keeping COST button pressed lasting more than 3 seconds(LCD on third line display system defaults price, eg O.OOCOST/KWH ),the rendered content begins moving up and down which means that the device
has entered the setting mode. After that, press FUNCTION for swithing , then press "UP"and "DOWN" button again to set value which ranges in OO.OOCOST/KWH 〜 99.99COST/KWH. After setting all above, press COST to return to Mode7 or it will automatically return to Mode7 without any pressing after setting with data storage.
Power meter socket, Energy meter socket, Energy meter cost socket, Power meter cost socket, Energy power meter socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com