Infinik i6x Brush Graphic Tutorial pro-test effective

(Infinity i6x) Brush Graphic Tutorial

Preparation tools

1. Infinik i6x;

2. U disk one (FAT32 format);

3. Clips, toothpick and other hard needles;

4. A computer is required to be in the same network segment as the box.

First, confirm the model of the box

Second, the ROOT (ROOT already skip this step)

Third, start the brush machine

First, confirm the box model is Infinity i6x

Open "Settings" as shown in the figure, and "About" to see the model of the box.

Second, start ROOT

1. Download Toolkit

Download address: http://app.shafa.com/apk/baiduyijianROOT.html

2. Install "BaiduRoot.exe" in the "tools" folder on your computer and open "Baidu One-click ROOT" after installation.

3. Then open connect.bat in the tool folder, as shown in the input box ip address.

How to check the IP address

4. Enter the IP address after the carriage return, Baidu a key root will prompt the connection is successful, click a key root.

5. After waiting for the root to succeed, double-click connect.bat in the tool folder to continue entering the IP address and press Enter. (Note: Baidu one-click ROOT may prompt ROOT failure. In fact ROOT is successful, you can continue the following steps, if you can not brush machine, then start from the ROOT)

6. Wait until the connection is successful. Double-click start.bat in the tool folder. At this point will write the recovery as shown below

7. Rename the downloaded flash package as update.zip and copy it to the root directory of the USB disk, and insert the USB port of the box (as shown in the figure).

8. Press the button on the box to shut down, then use the toothpick or pin to hold down the reset (position shown in the figure) and press the power button on the box. After 3-5 seconds, the brush will start automatically. At this time, the pin can be released. (If no final brush progress bar appears, please repeat from step 5)